供应ASTM A194 GR.8美制高强度六角螺母优质供货商

上一个

下一个

供应ASTM A194 GR.8美制高强度六角螺母优质供货商

规格：5/8

所属类型：六角螺母

价格：1元(含税)
发布时间：2013/12/4 9:09:25
数量：1000000000个
所在地：浙江嘉兴

点击询价收藏

产品信息

是否标准件	标准件	材质	合金钢
表面处理	无	等级/硬度	10.9级
螺纹类型	UNF	品牌	QF
标准类型	美标ASME	标准编号	A194
外径	10	厚度	10

产品介绍

供应ASTM A194 GR.8美制高强度六角螺母优质供货商

ASTM A194 GR.8 ASTM A194 pecification covers a variety of carbon, alloy, and martensitic and austenitic stainless steel nuts. These nuts are intended for high-pressure or high-temperature service, or both. Bars from which the nuts are made shall be hot-wrought. According to ASTM A194 the material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. Each alloy shall conform to the chemical composition requirements prescribed. Hardness tests, proof of load tests, and cone proof load tests shall be made to all nuts to meet the requirements specified. ASTM A194 stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Within the text, the SI units are shown in brackets. ASTM A194 covers size range ? through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range ? in. and M6 nominal and above. Unless otherwise specified, the American National Standard Heavy Hex Series (ANSI B 18.2.2) shall be used. Nuts up to and including 1 inch nominal size shall be UNC Series Class2B fit. Nuts over 1 inch nominal size shall be either UNC Series Class 2B fit or 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the marketplace

以上是供应ASTM A194 GR.8美制高强度六角螺母优质供货商的详细信息，如果您对供应ASTM A194 GR.8美制高强度六角螺母优质供货商的价格、厂家、型号、图片有什么疑问，请联系我们获取供应ASTM A194 GR.8美制高强度六角螺母优质供货商的信息