"DAIWA RABIN" provides sharply grinding and softly polishing.

• It helps make more efficient mirror finish in buffing for aluminum and stainless steel, improving the working environment a lot.
• It is useful in polishing for difficult to cut materials such as ceramic, carbide and glass, also ultra-high hardened surface treated surface.
• It spreads the grinding possibilities of fixed grinding stones for super finishing and mirror finishing, enhancing the working efficiency as a whole.
• "DAIWA RABIN" has started to be applied to such a field of sharpening for cutters that conventional rubberized grinding stones are not easy.

“大和化成” 提供锐利的研磨以及柔软的抛光!

• 它可以有效地帮助您进行镜面抛光,并可大幅改善工作车间的环境。
• 适用于抛光陶瓷、碳化物、玻璃等难于切削的材质,以及经过超高硬度处理的表面。
• 经过修整的海绵轮能够更好的适应超精加工和镜面精加工,总体上提高工作效率。
• 大和化成海绵轮已经开始应用于传统橡胶砥石无法涉足的刀具修整磨尖领域。
  
  
  
  
  
  
  
   

• DAIWA RABIN provides an evenly polished surface without leaving any deep scratches, unlike conventional papers and hard grinding stones, reducing the number of processes and improving surface roughness.
• DAIWA RABIN is possible to operate continuously for aluminum die cast due to it won't leave any scratches and cause clogging easily.
• DAIWA RABIN provides the most suitable product for de-burring that is troublesome with a wide range of materials, sizes and any shapes.
• DAIWA RABIN has sharpness enough for grinding and removing tooling marks and burrs even high hardened work materials (such as SKD, HSS and FCD that are around HRC60).
  It is also able to remove weld bead of stainless steel and make a polished surface when it is thin.
• No follow-up is necessary since it does not make any return or secondary burr.
• It prevents chipping, and no work can be grind too much. No product of poor quality is produced.
• DAIWA RABIN fits curved surfaces well, providing steady grinding without any jumping and chattering.
• It won't cause clogging easily for work materials such as gold and copper, and also it is not easy to have a dressing.
• Compared with other elastic grinding stones and part of conventional grinding stones, DAIWA RABIN was realized a higher wear resistance.
• DAIWA RABIN is able to use in both of dry and wet conditions.
• It helps minimize dust to an extent, improving the working environment.
  Also depending on conditions, DAIWA RABIN is able to prevent sparks.

• 大和化成海绵轮可提供均匀的平面抛光,不会像那些常规的砂纸和坚硬砥石一样留下深度擦痕,从而减少了操作工序且能极大地改善表面的粗糙度。
• 大和化成海绵轮可以用于铝制品的长时间加工,因为它不会留下任何擦痕和引起粘附。
• 大和化成海绵轮是 合适的用于深处去毛刺的产品,可用于多种材质,尺寸,形状。
• 大和化成海绵轮锋利无比,即使是很坚硬的材料(例如SKD,HSS和FCD等硬度在60左右的材料)它也可以研磨,去除一些工具擦痕和毛刺。并且可以用细粒度的海绵轮去除焊斑,并且抛光。
• 由于不会产生二次毛刺,避免了重复工作。
• 它能够预防碎屑及磨削过渡,不会产生次品。
• 大和化成海绵轮 适合曲面加工,能够稳定研磨而没有任何跳动或抖动。
• 对于金或铜等材料,它不易引起粘附,并且不容易被裹附。
• 比较其他的一些弹性砥石或者部分常规砥石,大和化成海绵轮被公认极为耐磨。
• 大和化成海绵轮可用于干燥和潮湿两种极端环境中。
• 大和化成海绵轮能够将灰尘控制到 少,改善工作车间环境。
  并且在一定条件下能够防止火花。