塑料滑动摩擦磨损试验仪 微机控制

产品型号:  M-200 :塑料摩擦,橡胶摩擦  用途:绝缘材料摩擦系数。

塑料滑动摩擦磨损试验仪 微机控制
特点:
适用于塑料制品及橡胶制品或其他复合材料的滑动摩擦,摩损性能测试。也可对试验中试样的摩擦力、摩擦系数和摩损量进行测定。
  M-200塑料滑动摩擦磨损试验仪-液晶的详细资料:
 
塑料滑动摩擦磨损试验仪 微机控制
制造标准:
         GB3960 塑料滑动摩擦磨损试验方法
产品名称:塑料滑动摩擦磨损试验仪
产品型号:M-200
显示方式:液晶显示
一、塑料滑动摩擦磨损试验仪 微机控制
主要适用范围及功能
本仪器是按照GB3960设计并制造。适用于塑料制品及橡胶制品或其他复合材料的滑动摩擦,摩损性能测试。也可对试验中试样的摩擦力、摩擦系数和摩损量进行测定。本机采用16位单片机电子处理系统,使得本仪器各项测试指标精度 高。由于集成程度很高,所以设备本身的稳定性极好,本机具有一次设置,全自动运行,实验结束后自动停机,并检测摩损程度。是各个科研单位,大学,企业实验室的必备检测设备。
二、塑料滑动摩擦磨损试验仪 微机控制
功能特点:
1、试样尺寸: 30mm*7mm*6mm±0.1 mm
  2、转动速度: 0-200转/分 连续可调
  3、负 荷: 196N ± 0.2%(可扩充到392N)
  4、摩擦环尺寸:￠40×10mm 倒角0.5×45°外圆表面与内圆同心度偏差小于0.01
  5、摩擦力矩: 0--4N?m ±0.5%
  6、计 数 器: 0-9999小时
    7、砝码重量:4KG砝码一件,1KG砝码4件,可实现重量迭加功能。
三、塑料滑动摩擦磨损试验仪 微机控制
精度:
     1、速度精度:1%
     2、负荷精度:0.5%
     3、摩擦力矩精度:1%
     4、计数器精度:1S
     5、传感器测量精度:1% FS
 
四、塑料滑动摩擦磨损试验仪 微机控制
主要配置:
1、主机一台
      2、高精度扭矩传感器一只
      3、彩晶显示控制系统箱一台
      4、4Kg砝码两件(备用一套)
      5、标准磨擦环四件(备用两件)
      6、台式微型打印机一台
      7、产品使用说明书一份
      8、产品合格证
      9、产品装箱单一份
      10、整机重量:约45公斤
Plastic sliding friction and wear tester controlled by Microcomputer
Product type: M-200: plastic friction, rubber friction uses: insulation material friction coefficient.
Plastic sliding friction and wear tester controlled by Microcomputer
Characteristic.
Applied to plastics and rubber products or other composite sliding friction, abrasion performance test. Can also be used to test sample, the friction coefficient of friction and abrasion quantity is measured.
M-200 plastic sliding friction and wear tester - crystal details:
Plastic sliding friction and wear tester controlled by Microcomputer
Manufacturing standards:
GB3960 test method for friction and wear
Product Name: plastic sliding friction and wear tester
Product type: M-200
Display: LCD
A friction and wear tester, microcomputer control
Main applicable range and function
The apparatus is designed and manufactured in accordance with GB3960. Applied to plastics and rubber products or other composite sliding friction, abrasion performance test. Can also be used to test sample, the friction coefficient of friction and abrasion quantity is measured. This machine uses 16 bit single chip electronic processing system, making the instrument each test indicator accuracy is very high. Since the integration degree is high, so the equipment itself excellent stability, this machine has a set, automatic operation, after the end of the experiment of automatic shutdown, and detecting the abrasion degree. Various research institutes, University, enterprise necessary laboratory testing equipment.
Two friction and wear tester, microcomputer control
Function characteristics:
In 1, the sample size: 30mm*7mm*6mm ±0.1 mm
2, rotation speed of 0-200 RPM: continuously adjustable
3, load: 196N ± 0.2% ( can be expanded to 392N )
In 4, the friction ring size: - 40 × 10mm chamfer of 0.5 x 45 degrees external round surface and inner circle concentricity deviation is less than 0.01
In 5, the friction torque: 0--4N ?m ± 0.5%
6, counter: 0-9999 hours
7, weight: 4KG weight a, 1KG weight 4, can realize the function of the weight stack.
Three friction and wear tester, microcomputer control
Precision:
1, speed accuracy: 1%
2, load precision: 0.5%
In 3, the friction torque precision: 1%
4, counter accuracy: 1S
In 5, the sensor measurement precision: 1% FS
Four friction and wear tester, microcomputer control
Main configuration:
In 1, a mainframe
2, a high precision torque sensor
3, color crystal display control system box
In 4, 4Kg weight two ( reserve a set)
In 5, the standard friction ring four ( reserve two )
6, desktop mini printer
7, product using a manual
8, product certification
9, product packing list
In 10, the whole machine weight: about 45 kg